Super Safety Services Mumbai, Maharashtra

Send SMS
Contact Us

Alcohol Detectors-Breathalyzers

Fuel Cell Professional Alcoscan

Fuel Cell Professional Alcoscan

The Fuel Cell Sensor Technology, ALP-1 is highly-upgraded professional breathalyzer for measuring alcohol in human breath. It is installed re-placeable fuel cell sensor module technology with the best accuracy. Test result can be storage on ALP-1 as well as print out the data through wire-less connecting with mobile printer.

Indication of B.A.C.

0.000 to 4.000 ‰ or

0.000 to 0.400?C or

0.000 to 2.000 mg/l BrAC by LCD display


Replaceable fuel cell type alcohol sensor


±0.005?C at 0.100?C



Measurements memory

Approx. 500 measurements

Measurement mode

Normal, Fast and Passive mode


Two 1.5V "AA" size alkaline batteries

Battery Change

Approx. 3,000 tests


198g (Including Batteries)


133 (height) X 64 (width) X 33 (thickness) mm

Audible warnings

3 steps beep warning of alcohol detection with LED display

Ambient conditions: Storage

-10 to 50 / Operation: -5 to 40

Available color


Additional Information:

Alcohol Detector with Printer

Alcohol Detector with Printer

Detection range:

For each calibration level there is a corresponding breathalyser model.

Calibration levels (in mg/l of air)

0, 10-0, 15-0, 20-0, 25-0, 30-0, 35-0, 40

Equivalences (in g/l of blood)

0, 20-0, 30-0, 40-0, 50-0, 60-0, 70-0, 80

Instruction for use:

  1. Remove the tube as shown.
  2. Blow up the balloon with a single breath.
  3. Push the ends in as far as you can.
  4. Insert the tube into the mouth of the balloon.
  5. Press all the air out of the balloon over a 15 seconds interval.

Additional Information:

Alcohol Analyzer Vehicle System

Alcohol Analyzer Vehicle System

With more than two decades of experience in the field of Industrial Safety Products, we have emerged as a respectable leader for the supply of Alcohol Detector.

ALX1000 is the Fuel cell type alcohol sensor breathalyzer with the ignition interlock device for automobiles. After getting in the car with ALX1000 installed, the driver must be tested for alcohol and the ignition controlled depending on the result of the analysis. Unlike previous ignition interlock devices, ALX1000 is more reasonably priced, as well as providing convenience of enabling users to change the sensor themselves.

Our product Alcohol Breath Tester was developed keeping in mind the safety of people working in indoor or outdoor work sites.
This Hand Held Alcohol Detector conforms to government standards and industry regulations.

New models of this Breathanalyser keep developing to produce higher quality products without cutting corner.

Indication of B.A.C.0.000 to 4.000 ‰ or
Full 3 decimals0.000 to 0.400 % BAC or
0.000 to 2.000 mg/l BrAC by LED display
SensorFuel cell type alcohol sensor
Accuracy± 0.005% BAC at 0.100% BAC
PowerTwo 1.5V "AAA" size alkaline batteries and 12V _cigar jack in car : 5 to 50 A°C>
Weights100g (Including Batteries)
dimensions(mm)116 (height) X 50 (width) X 20 (thickness)
Audible warnings3 steps beep warning of alcohol detection with LED display
Ambient conditionsStorage : 5 to 50 ºC
Operations : 5 to 40 ºC
Available ColorBlack

Additional Information:

Alcohol Breath Detector

Alcohol Breath Detector

ALCOSCAN AL3200 has a fast mode and normal mode. People are tested by Fast mode first, then people who have a specific alcohol level or fail to pass a fast mode have to be tested by normal mode. When fail to pass a fast mode, flashing light is working and people must test a normal mode by blowing into a device with a straw. Also test result can be printed out so that Manager check out worker’s alcohol concentration. It's been usually used in the Japanese transportation companies.

Fast mode part
Indication of B.A.C"0-Zero", "Fail-BAC Detected" 2 Steps (Test result can be printed out)
SensorSemiconductor alcohol sensor
Accuracy(+ -)0.01% BAC at 0.05% BAC
MouthpieceNo use
CalibrationReplaceable AL32M
Normal mode part
Indication of B.A.C.0.000% BAC ~ 0.400% BAC (Test result can be printed out)
SensorFuel Cell Sensor
Accuracy(+ -)0.005% BAC at 0.100% BAC
CalibrationReplaceable AL32FM
Common part
DisplaySegment display
Dimension320mm (width) X 130mm (thickness) X 310mm (height)

Additional Information:

Alcoscan EBS (Entrance Breathalyzer System)

Alcoscan EBS (Entrance Breathalyzer System)

ALCOSCAN EBS (Entrance Breathalyzer System) is the Fuel cell alcohol sensor breathalyzer for gate locking. People who want to enter inside must test alcohol concentration and the gate locking controlled depending on the result of the analysis.

Indication of B.A.C.PASS: Indicate Green Lamp
FAIL: Indicate Red Lamp
SensorFuel cell type alcohol sensor
Accuracy±0.005?C at 0.100?C
MouthpieceNo need to use
PowerDC 12V, 1A
Ambient conditions5 to 40 ºC/ Operation: 0 to 50 ºC
Dimension200 (height) X 100 (width) X 70 (thickness) mm

Additional Information:

Hand Held Alcohol Tester

Hand Held Alcohol Tester

We offer extensive and comprehensive range of Alcohol Sensor. The product Hand Held Alcoscan is designed keeping in mind all innovative approaches to workforce safety and demands, made by industries worldwide.

Alcoscan is a hand held, portable breath alcohol tester to check subject's breath alcohol concentration with reliable accuracy and it is available to test in Passive mode. Breathalyzer with Pre- Calibrated Replaceable Sensor Module.

In addition, we offer varied range of Alcohol Detectors which are being widely used in industries like Metallurgical, Steel, Aluminium, Power, Energy, Petrochemical, Oil & Gas, Glass, Chemical, Cement Offshore & Onshore Industry, Furnace Areas, Fire Departments, etc.

Note- Also available with portable printer (AL-6000P)

Indication of B.A.C.Normal Mode:
0.00 to 4.00 ‰ or
0.000 to 0.400% BAC or
0.00 to 2.00 mg/l BrAC by LED display

Fast(Screening) Mode:
“0”, “Low” and “High” 3 steps
SensorSemiconductor type alcohol sensor
Accuracy±0.01% BAC at 0.05% BAC
MouthpieceNormal Mode : use / Fast Mode: No use
SensorTwo 1.5V "AA" size alkaline batteries / Auto Power off
Weights115g (Including Batteries)
Dimension(mm)124 (height) X 56 (width) X 41 (thickness) MAX
Audible warnings3 steps beep warning of alcohol detection with LED display
Available colorSilver / Red
CertificateCE, FDA 510K listed, DOT, Australian Standard

Additional Information:

Fuel Cell Breathalyzer- IBlow10

Fuel Cell Breathalyzer- IBlow10

We have introduced new and advanced Alcohol Breath Sensor - IBlow10 which is based on Advanced SURACELL Fuel Cell Sensor Technology. With this Alcohol Detector alcohol level of 12 persons per minute can be measured and results are also displayed in numeric as well as low- high levels.

Special Features:

• New advanced highly sensitive SuracellTM sensor technology (Fuel Cell sensor)
• With PC Connectivity
• 12 people can be measured per minute
• No mouthpiece required. Instead replaceable & washable Blow Cap provided for hygienic use
• No calibration required until 5000 tests or 1 year, whichever is earlier
• Reminder for Calibration & Grace period
• LED Light Alerts (Red for Fail & Green for Pass)
• Display Window Provided
• Manual Sampling Function (Alcohol content in Liquid can be measured)
• Slow and Fast Measuring Modes available
• Adjustable Display and Power Off time
• Built-in Magnet attachable to Vehicles

Application Vehicles Small Appliances Power Plants/Power Station Domestic Supply

Additional Information:
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material


Looking for Alcohol Detectors-Breathalyzers ?


    We will contact you soon !

    Bhupesh Kamdar

    (Managing Director)

    Super Safety Services

    Masjid, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us