High Pressure Regulators From ABJ

Two Stage Pressure Regulator

We are long-time established manufacturer, distributor, importer and exporter of High Pressure Regulator. HPR 540 Series is cost effective product equivalent to Concoa 432 series, Tescom 44-3400 series, Go Regulator CYL-20 series, Swagelok KCY series.

The HPR – 540 series is a stainless steel two stage pressure regulator recommended for use with high purity corrosive gases requiring precise, contaminant free pressure control. The two stage design yields a delivery pressure change of less that 0.05% with varying inlet pressure which minimizes the supply pressure effect caused by decaying inlet pressure. Internal surface finish of body is better than 1.6µm which allows easier cleaning and lesser particle contamination. Stainless steel bonnet prevent atmospheric corrosion and maintain appearance.

Our Two Stage Pressure Regulator are being exported to global regions like of Middle East, Africa, South Asia, Latin America, Europe, Bangladesh, Bhutan, Nepal, Sri Lanka and many more.

FEATURES & SPECIFICATIONS

  • Stainless Steel Diaphragm
  • Standard 10 µm stainless steel filter at inlet of main valve assembly
  • 1.6 µm internal surface finish as standard
  • Cleaned for Oxygen service.
  • Bubble tight shut-off
  • Inlet pressure: 210 bar (3000 psi)
  • Outlet range: 0 to 25 bar (360 psi)
  • Supply pressure effect less than 0.05%
  • Flow Coefficient: Cv 0.05
  • Design Pressure: 1.5 times working pr.
  • All connections: ¼” NPT (F)
  • Seat: PTFE/PCTFE
  • Max. Operating Temperature:
  • PTFE – 66 C
  • PCTFE – 80 C
  • Inlet end connection: ¼” NPT (F)
  • Outlet end connection: ¼” NPT (F)

This Pressure Regulating Device provides adequate protection to a person working in adverse working conditions.Our Oxygen High Pressure Regulator follows industrial norms like Indian Standards depending on the product.


Additional Information:
  • Minimum Order Quantity: 1 Unit
  • Item Code: SSS-WCE-TSPR-HPR540
  • Port of Dispatch: Mumbai
  • Production Capacity: 60 percent additional production capacity over average dispatches
  • Delivery Time: Ready ex-stock
  • Packaging Details: Standard / tailormade packaging (for delivery in India and Abroad).

Stainless Steel Single Stage Regulator - POU 306 Series

POU – 306 Seriesis cost effective product equivalent to Concoa 480 series, Tescom 44-18 POU series, Swagelok KCP series.

The POU – 306 series is a stainless steel single stage pressure regulator recommended for use with high purity corrosive gases up to 40 bar (inlet pressure) where precise gas delivery systems require high leak integrity and lower dead volume which is particularly important for corrosive and toxic gases. Internal surface finish of body is better than 1.6µm which allows easier cleaning and lesser particle contamination. Stainless steel bonnet prevent atmospheric corrosion and maintain appearance.

FEATURES & SPECIFICATIONS
  • Stainless Steel Diaphragm
  • Standard 10 µm stainless steel filter at inlet of main valve assembly
  • 1.6 µm internal surface finish as standard
  • Cleaned for Oxygen service
  • Bubble tight shut-off
  • Inlet pressure: 40 bar (580 psi)
  • Outlet range: 0 to 10 bar (150 psi)
  • Flow Coefficient: Cv 0.05
  • Design Pressure: 1.5 times working pr.
  • All connections: 1/8” NPT (F)
  • Seat: PTFE
  • Max. Operating Temperature:
  • PTFE – 66 C
  • Inlet end connection: 1/8” NPT (F)
  • Outlet end connection: 1/8” NPT (F)

Additional Information:
  • Minimum Order Quantity: 1 Unit
  • Item Code: SSSWWS-HPR-1703
  • Port of Dispatch: Mumbai
  • Production Capacity: 60 percent additional production capacity over average dispatches
  • Delivery Time: Ready ex-stock
  • Packaging Details: Standard / tailormade packaging (for delivery in India and Abroad).

Auto Changeover Pressure Regulator

We offer extensive and comprehensive range of Changeover Pressure Regulator.

This ACR – 207 Series is cost effective product equivalent to Concoa 526 series, Tescom CS-2200 series, Go Regulator COM-2B series, Swagelok KCM series.

The ACR-207 series system is a two stage gas delivery system that uses two diaphragm sensed pressure regulators into a single body to create a compact Auto-Changeover Regulator system. The common outlet port is connected to a single line regulator that ensures continuous flow of gases in critical applications unaffected by supply source depletion. When primary supply drops below the changeover pressure, the ACR-207 system automatically switches from the depleted supply source to an alternate supply source. Check valves and shut-off valves are fitted as standard to prevent escaping gas & complete isolation during change out of cylinders.

FEATURES & SPECIFICATIONS

  • Stainless steel diaphragm
  • Bracket mounted for easy installation
  • Simple 270 turn operation
  • Cleaned for Oxygen service
  • Available in Stainless Steel, Brass & Monel
  • Cylinder changing possible during operation
  • 0.01% pressure control accuracy under decaying supply pressure
  • Inlet pressure: 210 bar (3000 psi)
  • Outlet range: 0 to 20 bar (300 psi)
  • Flow Coefficient: Cv 0.05
  • Design Pressure: 1.5 times working pr
  • All connections: ¼” NPT (F)
  • Seat: PTFE/PCTFE
  • Max. Operating Temperature:
  • PTFE – 66 C
  • PCTFE - 80 C

Auto Changeover Pressure Regulator System is used in work areas which are prone to higher risk of accidents. The product Pressure Regulator is designed keeping in mind all innovative approaches to workforce safety and demands, made by industries worldwide

In addition, we offer varied range of Auto Pressure Regulator which are being widely used in industries like Metallurgical, Steel, Aluminium, Power, Energy, Petrochemical, Oil & Gas, Glass, Chemical, Cement Offshore & Onshore Industry, Furnace Areas, Fire Departments, etc.


    Additional Information:
    • Minimum Order Quantity: 1 Unit
    • Item Code: SSS-HPR-ACPR-207
    • Port of Dispatch: Mumbai
    • Production Capacity: 60 percent additional production capacity over average dispatches
    • Delivery Time: Ready ex-stock
    • Packaging Details: Standard / tailormade packaging (for delivery in India and Abroad).

    Single Stage High Pressure Regulator

    We are the prominent manufacturer, supplier, trader, distributor and exporter of Single Stage Gas Regulator. HPR 360 Series is cost effective product equivalent to Concoa 422 series, Tescom 44-2200 series, Go Regulator PR-1 series, Swagelok KPR series.

    The HPR-360 series is a stainless steel single stage pressure regulator recommended for use with high purity corrosive gases up to 210 bar (inlet pressure) where gas delivery systems require high leak integrity and low dead volume which is particularly important for corrosive and toxic gases. Internal surface finish of body is better than 1.6µm which allows easier cleaning and lesser particle contamination. Stainless steel bonnet prevent atmospheric corrosion and maintain appearance.

    FEATURES & SPECIFICATIONS
    • Stainless Steel Diaphragm
    • Standard 10 µm stainless steel filter at inlet of main valve assembly
    • 1.6 µm internal surface finish as standard
    • Cleaned for Oxygen service.
    • Bubble tight shut-off
    • Inlet pressure: 210 bar (3000 psi)
    • Outlet range: 0 to 35 bar (500 psi)
    • Flow Coefficient: Cv 0.06
    • Design Pressure: 1.5 time working pr.
    • All connections: ¼” NPT (F)
    • Seat: PTFE / PCTFE
    • Max. Operating Temperature:
    • PTTFE - 66 C
    • PCTFE - 80 C
    • Intel end connection: ¼” NPT (F)
    • Outlet end connection: ¼” NPT (F)

    This Gas Pressure Regulator allows the workers to handle hazardous tasks at workplace with adequate safety.

    Single Stage Pressure Regulator finds its application in industries like Power, Energy, Railways, Automobiles, Aviation, Engineering and Construction. Our product is well known for its convenience to use, high strength, lightweight and high durability

     


    Additional Information:
    • Minimum Order Quantity: 1 Unit
    • Item Code: SSS-HPR-SSHPR-HPR360
    • Port of Dispatch: Mumbai
    • Production Capacity: 60 percent additional production capacity over average dispatches
    • Delivery Time: Ready ex-stock
    • Packaging Details: Standard / tailormade packaging (for delivery in India and Abroad).

    High Pressure Cylinder Regulator

    ThisAcetylene High Pressure Regulator helps in protecting workers from life-threatening hazards at workplace. Our HPR-279 series is a brass single stage high pressure regulator suited for cylinder usage with high purity and non-corrosive gases. It is designed to accept inlet pressure up to 3000 psig & deliver outlet pressure from 0-100 psig up to 0-1300 psig. Internal surface finish of body is better than 1.6µm with chrome plating as option which allows easier cleaning and lesser particle contamination. Uniquely designed piston sensing element offers excellent regulation characteristics.

    FEATURES & SPECIFICATION
    • Stainless Steel Piston
    • Standard 10 µm sintered bronze filter at inlet of main valve assembly
    • 1.6 µm internal surface finish as standard
    • Cleaned for Oxygen service
    • Bubble tight shut-off
    • Inlet Pressure: 210 bar (3000 psi)
    • Outlet range: 0 to 90 bar (1300 psi)
    • Supply pressure effect less than 0.05%
    • Flow Coefficient: Cv 0.06
    • Design Pressure: 1.5 times working pr.
    • All Connections: ¼” NPT (F)
    • Seat: PTFE / PCTFE
    • Max. Operating Temperature:
    • PTFE - 66 C
    • PCTFE - 80 C
    • Inlet end connection: ¼” NPT (F)
    • Outlet end connection: ¼” NPT (F)
    • Hydrogen High Pressure Regulator being light weight but sturdy offers comfort along with protection.
    • High Pressure Cylinder Regulator is available in customised styles and colours as per customer’s demand.

    Our quality management team, inspects and tests Cylinder Pressure Regulator before it is dispatched to customers.


    Additional Information:
    • Minimum Order Quantity: 1 Unit
    • Item Code: SSS-HPR-HPCR-HPR279
    • Port of Dispatch: Mumbai
    • Production Capacity: 60 percent additional production capacity over average dispatches
    • Delivery Time: Ready ex-stock
    • Packaging Details: Standard / tailormade packaging (for delivery in India and Abroad).

    Two Stage Gas Regulator

    We have over two decades of vast industrial knowledge and experience in producing superior quality Fuel Gas Pressure Regulator.It is manufactured from brass material which is used for analytical and process applications requiring precise contaminant free pressure control. This gas pressure regulator consisting of two diaphragm and poppet has high strength and corrosion resistant.

    Specifications:

    I. It consists of Stainless Steel Diaphragm
    II. Standard 10 µm sintered bronze filter at inlet of main valve assembly
    III. 1.6 µm internal surface finish as standard
    IV. Cleaned for Oxygen service.
    V. Bubble tight shut-off
    VI. Inlet pressure: 210 bar (3000 psi)
    VII. Outlet range: 0 to 25 bar (360 psi)
    VIII. Design Pressure: 1.5 times working pr.
    IX. Supply pressure effect less than 0.05%
    X. Flow Coefficient: Cv 0.05
    XI. All connections: ¼” NPT (F)
    XII. Seat: PTFE / PCTFE
    XIII. Max. Operating Temperature: PTFE - 66º C / PCTFE - 80 º C
    XIV. Inlet end connection: ¼” NPT (F)
    XV. Outlet end connection: ¼” NPT (F)
    XVI. The basic materials used in manufacturing Brass Pressure Regulator are well tested by our testing team to ensure its safety.

    Our engineers and technical team also provide customised designs High Pressure Brass Regulator as per customer requirements and applications. Advanced techniques are used to produce Two Stage Brass Pressure Regulator with precision.

    Additional Information:
    • Minimum Order Quantity: 1 Unit
    • Item Code: SSS-WCE-TSGR-HPR450
    • Port of Dispatch: Mumbai
    • Production Capacity: 60 percent additional production capacity over average dispatches
    • Delivery Time: Ready ex-stock
    • Packaging Details: Standard / tailormade packaging (for delivery in India and Abroad).

    Double Stage & Double Gauge Pressure Regulator

    Features:
    • Regulator body & bonnet made of forged brass thus elimination casting porosity

    • Forged body has the capacity to withstand 1 ½ times full cylinder pressure

    • Diaphragm is made of nylon reinforced neoprene rubber

    • Regulators are manufactured & tested as per IS:6901

    • Regulators can be used with various gases i.e, oxygen, hydrogen, nitrogen, argon, acetylene & CO2

    • Suitable for brazing, heating, welding, beverage plants, research lab, purging, etc applications

     

    Specifications for gas regulators :

     

    Gas

    Max Inlet Pressure In Bar

    Max Outlet Pressure In Bar

    1.Oxygen

    230

    10

    2.Acetylene

    20

    1.5

    3.Nitrogen

    230

    10

    4. Hydrogen

    230

    10

    5. Carbon Dioxide

    230

    10

    6. Argon

    230

    10


      Additional Information:
      • Minimum Order Quantity: 1 Unit
      • Item Code: SSSWWS-WCE-1606
      • Port of Dispatch: Mumbai
      • Production Capacity: 60 percent additional production capacity over average dispatches
      • Delivery Time: Ready ex-stock
      • Packaging Details: Standard / tailormade packaging (for delivery in India and Abroad).
      Looking for High Pressure Regulators From ABJ ?
      © Super Safety Services, Mumbai
       
      Desktop Site Back to top